The World's 1st FilaDryer with a capacity of 4 spools. Temperature Balance and High Efficiency
Up to 110℃, Professional Drying and Annealing, Born for Engineering 3D Printing Filament
Best Dryer for Beginner, Up to 70℃, 360° Surround Heating During 3D Printing
Built-in Circulating Fan, the Best 3D Printer Filament Dryer for Beginners.
Split-type 3D Printer Filament Dryer. 2-IN-1 Filament Dryer Combine with Storage Box
Upgraded your Bambu Lab AMS, Enables Drying while Printing
DIY Used Filament. Fusion Splicer, Weldable to 1.75mm PLA, ABS, PETG, PCL, PA and PC 3D Filament
Match Your Project Needs
Duplicate selections were adjusted automatically so each compared product is unique.
You have reached the maximum number of comparison products.
Swipe product cards or the table horizontally to view more comparison content.
| Product | Tensile Strength | Elongation | Flexural Strength | Flexural Modulus | Impact Resistance | HDT | Print Parameters | Compatible Printers | Annealing | Drying Conditions |
|---|
Balanced overall performance with superior toughness and heat resistance over standard ABS.
Enclosures, Functional Parts, Consumer Electronics
More user-friendly than pure nylon; ideal as a transitional engineering material.
Structural Components, Jigs & Fixtures, Functional Prototypes
Glass-fiber reinforced for enhanced rigidity and superior dimensional stability.
Brackets, Jigs & Fixtures, Structural Parts
High heat and impact resistance, but requires demanding print conditions.
Industrial Enclosures, Functional Parts, Heat-Resistant Components
Lightweight with excellent chemical resistance, but features high bed-adhesion difficulty.
Chemical Containers, Flexible Functional Parts
High rigidity and wear resistance, but with noticeable moisture absorption.
Manufacturing Jigs, Gears, Structural Components
Dimensionally stable and high-strength; more reliable and consistent than PA6.
High-Strength Functional Parts, Lightweight Structural Components
High strength and rigidity with outstanding overall mechanical performance.
Load-Bearing Parts, Mechanical Components, Jigs & Fixtures
Defined flame-retardant properties; ideal for safety-critical applications.
Electrical Enclosures, Flame-Retardant Components
Extreme temperature resistance, chemical inertness, and strength, but with a very high entry barrier.
Aerospace, Medical, Extreme Industrial Applications
Values are based on the provided comparison sheet and may vary by printer, profile, moisture level and test method.
Nylon-6 kolfiber (PA6-CF) 3D-skrivarfilament 0,5–1 kg
647,00 Kč
Sändning:
Färg/Typ:
647,00 Kč
Enkel Nylon (E-PA) 3D-skrivarfilament 1 kg
755,00 Kč
Sändning:
Färg/Typ:
755,00 Kč
Nylon-6 Glasfiber (PA6-GF) 3D-skrivarfilament 1 kg
863,00 Kč
Sändning:
Färg/Typ:
863,00 Kč
SUNLU Engineering-filamentkollektion EPA, PCABS, PA6CF, PA12CF, PA6-GF, PP, PC, ABS-GF, ABS-FR, PEEK
486,00 Kč
Sändning:
Färg/Typ:
486,00 Kč
Nylon-6 kolfiber (PA6-CF) 3D-skrivarfilament 0,5–1 kg
647,00 Kč
Sändning:
Färg/Typ:
Enkel Nylon (E-PA) 3D-skrivarfilament 1 kg
755,00 Kč
Sändning:
Färg/Typ:
Nylon-6 Glasfiber (PA6-GF) 3D-skrivarfilament 1 kg
863,00 Kč
Sändning:
Färg/Typ:
SUNLU Engineering-filamentkollektion EPA, PCABS, PA6CF, PA12CF, PA6-GF, PP, PC, ABS-GF, ABS-FR, PEEK
486,00 Kč
Sändning:
Färg/Typ:
Supercharge your SUNLU setup. Dive into expert guides, deep-dive walkthroughs, and ultimate printing inspiration.
Handla med denna rabattkod nu för att få det bästa priset.
Har du ett konto?
Logga in för att gå till kassan snabbare.
