SUNLU S2 フィラメントドライヤー、3Dプリント中の360°全周加熱

This SUNLU AMS Heater is compatible with the Bambu Lab AMS - Automatic Material System.

• Please note that this product is optimized and upgraded exclusively for Bambu Lab's AMS (1st gen), and is not compatible with Automatic Material Systems from other brands.
• Regarding the visibility of the lid, the entire lid is not fully transparent. There is a transparent area on the front of the lid that allows you to see the internal operation.

• When opening this product, lift it only to the designated stop position. Pay attention to the opening angle and force to avoid damage from excessive movement.
• To ensure optimal drying results, do not open the AMS Heater during the drying process.
• When the ambient temperature is below 10℃, slow heating or the actual temperature inside the chamber being slightly lower than the displayed temperature is normal.
• When setting the working temperature to 70℃, please ensure the filament spool has a temperature tolerance greater than 70℃ to avoid deformation.

1. Do not place the SUNLU AMS Heater within the reach of children. Electrical safety should be observed during operation. Do not use this product near water, such as bathrooms, bathtubs washbasins and other places where water is easily accessible.
2. Please use the original power cord or a power cord that meets the safety certification requirements.
3. When not using this product, please turn off the power to avoid sudden fire.
4. During the working process of this product, please do not put the product on the objects which are sensitive to temperature.
5. Do not touch the heater or fan inside the box during the working process of this product to avoid burns. When drying filaments, the top cover of the drying box should be covered to avoid heat dissipation. Avoid moving this product during normal operation to prevent burns caused by the high temperature of the outer surface.
6. Please do not block the internal air inlet and outlet to avoid abnormal heat accumulation.
7. If the product malfunctions, please turn off the power and disconnect the power cord from the power outlet, then contact the after-sales support team (support@sunlu.com).

• Issue: Failure to Power On
  Possible Causes: Abnormal Power Connection
  Troubleshooting Methods: Check whether the power cord is properly connected to the socket ,and verifyif the fuse is blown.
• Issue: Screen Garbling/Incomplete Display
  Possible Causes: Poor contact or a damaged display screen.
  Troubleshooting Methods: Power off and restart. If the issue persists, the display screen may need to be replaced. Please contact us via support@sunlu.com.
• Issue: ER1
  Possible Causes: Abnormal Temperature Detection
  Troubleshooting Methods: Check whether the temperature sensor connection is secure.
• Issue: ER2
  Possible Causes: Left PTC Heating Fan Malfunction
  Troubleshooting Methods: Check whether the fan is not rotating or is obstructed by foreign objects.
• Issue: ER3
  Possible Causes: Right PTC Heating Fan Malfunction
  Troubleshooting Methods: Check whether the fan is not rotating or is obstructed by foreign objects.

For non-pre-sale orders, the delivery time is generally 1-7 working days, and you can track your order on the website.
Click here for more information(Shipping Policy).

Our goal is for every customer to be totally satisfied with their purchase. If this isn’t the case, let us know and we’ll do our best to work with you to make it right.

Store email: sales02@sunlu.com
After-sales email: support@sunlu.com

You selected the wrong country/region, please go back to the product page, click the correct country or region where you are, and then select the product to checkout.
We can only ship from the warehouse in the corresponding country/region and cannot ship across country or regions.

PLA is a food-safe material, but the filament will be added with toner during the production process, and it may also be contaminated by the printing nozzle during the printing process, so we do not recommend you to use PLA to print tableware