SUNLUフィラメントコネクター FC01、フュージョンスプライサー、1.75mm PLA、ABS、PETG、PCL、PA、PCフィラメントに接合可能
- Free shipping to most of USA, EU, UK, CA and AU regions
- Guaranteed Secure Checkout
[ゼロウェイスト] SUNLU フィラメントコネクター FC01は、3Dプリントで余ったフィラメントを最大限に活用し、廃棄物を最小限に抑えてコストを削減します。融着機能により、末端部分の材料廃棄を減らし、新しい消耗品の購入費用を節約できます。廃棄物ゼロで効率的なプリントプロジェクトを実現します。
[クリエイティブDIY、マルチカラー印刷] 同じ素材で色の異なるフィラメントを簡単に融着できます。マルチカラーモデルやグラデーション効果など、鮮やかで個性的な3Dプリントを作成できます。SUNLU フィラメントコネクター FC01で創造力を解き放ち、一つひとつの作品をユニークに仕上げましょう。
[迅速かつ正確な加熱] SUNLU フィラメントコネクター FC01は約3分で185°Cまで急速に加熱でき、作業効率を高めて時間を節約します。±3°C以内の温度精度により、安定した効率的な使用感と信頼性の高い一貫した動作を実現します。
[幅広い素材に対応] SUNLU フィラメントコネクター FC01は最高240°Cに対応し、PLA、ABS、PETGなどさまざまな3Dプリント素材に使用できます（直径1.75mm）。使用する素材を問わず、優れた融着性能を発揮します。
[安全設計] SUNLU フィラメントコネクター FC01の高度な温度制御機能と高品質な断熱材により、融着中の外部温度を50-100°Cに抑え、安全で安心して使用できます。
[簡単操作] シンプルで直感的なインターフェースを備えた使いやすい設計です（電源アダプターは付属していません。電源投入時の問題を避けるため、5V 2A以上のアダプターを使用してください）。フィラメントの種類に応じて適切な設定を選択し、詳しい説明書と動画チュートリアルに従ってください。複雑な調整は必要なく、初心者にも最適です。融着は10-15秒で完了します。
Model: Filament Connector FC01
N.W.: 143g
G.W.: 250g
Product Dimensions: 111×79.4×38mm
Maximum Temperature Resistance: ≤250℃
Upper Temperature Limit: 240℃
Power Input Specification: 5V 2A
Adapter: None
Applicable Wire Diameter: 1.75±0.03mm
Included Accessories:
- Filament splicer × 1
- Color box × 1
- User manual × 1
- Teflon tubes: 200 pcs (26 mm)
- USB cable × 1
Packaging Details:
- Color box dimensions: 138 × 119 × 48 mm
- Carton dimensions: 503 × 297 × 270 mm (40 pcs per carton)
Warranty:
One-year warranty. Damage caused by using non-original brand power supplies or incorrect operation not following the user manual is not covered under warranty.
Recommended Operating Parameters:
- PCL series: Default splicing temperature 85°C, heating time 1 minute, suggested splicing time 5-6 seconds
- PLA series: Default splicing temperature 185°C, heating time 3 minutes, suggested splicing time 7-8 seconds
- ABS series: Default splicing temperature 220°C, heating time 3-4 minutes, suggested splicing time 7-8 seconds
- PETG series: Default splicing temperature 210°C, heating time 3-4 minutes, suggested splicing time 7-8 seconds
- PA/PC series: Default splicing temperature 230°C, heating time 5 minutes, suggested splicing time 9-10 seconds
Perfect for maximizing your filament usage and unlocking endless creative possibilities in multi-color 3D printing, the FC01 filament splicer is an essential tool for any maker's workbench.
Fully utilize leftover 3D printing filament, minimizing waste and saving costs. The fusion splicer reduces tail material waste and helps users save on new consumables. Achieve efficient printing projects with zero waste.
Professional fusing technology ensures strong joints and smooth surfaces without affecting print quality. Produces models with smooth, seamless surfaces and stable performance during printing, ensuring high-quality results for both detailed and large components.
Easily fuse filaments of the same material but different colors. Create vibrant, personalized 3D prints, whether for multi-color models or gradient effects. Unleash your creativity and make every piece unique.
Easily fuse filaments of the same material but different colors. Create vibrant,User-friendly design with a simple, intuitive interface. Select the appropriate settings based on the filament type, and follow detailed instructions and video tutorials. Fusion completes in 10-15 seconds. personalized 3D prints, whether for multi-color models or gradient effects. Unleash your creativity and make every piece unique.
FAQs
What should I be aware of when using filament connectors?
What should I be aware of when using filament connectors?
1. Pay attention to the inside of the machine, the temperature of the black snap part is about 50℃ to 100℃, please don't touch it directly.
2. For 1.75mm diameter filament only (The hole is about 2.2mm). In order to guarantee a good connection, it is recommended to dry the filament before bonding to ensure that the filaments are not in a damp state.
3. As soon as the machine is energized/turned on, it will start warming up on its own, and the default is the preset temperature corresponding to the currently displayed material, so please be careful to disconnect the power supply when not in use or not near the machine, so as not to create firefighting problems.
About the Teflon tube inside the package?
About the Teflon tube inside the package?
For each set of machine/box, a pack of Teflon tubing will be given free of charge from the factory, the quantity is not fixed (about 200 pcs), customers need to buy it by themselves after using it up.
How to store this machine?
How to store this machine?
It needs to be stored at room temperature of at least 10℃, it is not recommended that electronic products work in a low-temperature environment to avoid abnormal temperatures or even damage to the machine.
Order Tracking
Order Tracking
For non-pre-sale orders, the delivery time is generally 1-7 working days, and you can track your order on the website.
Click here for more information(Shipping Policy).
What is the Refund & Return policy?
What is the Refund & Return policy?
Our goal is for every customer to be totally satisfied with their purchase. If this isn’t the case, let us know and we’ll do our best to work with you to make it right.
Store email: sales02@sunlu.com
After-sales email: support@sunlu.com
Why does it show a shipping charge of several hundred dollars at checkout?
Why does it show a shipping charge of several hundred dollars at checkout?
You selected the wrong country/region, please go back to the product page, click the correct country or region where you are, and then select the product to checkout.
We can only ship from the warehouse in the corresponding country/region and cannot ship across country or regions.
Is our filaments(like PLA, PLA+, etc.) a food safe material?
Is our filaments(like PLA, PLA+, etc.) a food safe material?
PLA is a food-safe material, but the filament will be added with toner during the production process, and it may also be contaminated by the printing nozzle during the printing process, so we do not recommend you to use PLA to print tableware
Subscribe to our emails
- 選択するとページ全体が更新されます。
