![[USA Only] 3D Printing Special Offers Collection, FDM 3D Printing Filament and 3D Printing Mates Clearance Sales](http://store.sunlu.com/cdn/shop/files/E2ads20232-bar.png?v=1773391067&width=1000)
![[USA Only] 3D Printing Special Offers Collection, FDM 3D Printing Filament and 3D Printing Mates Clearance Sales](http://store.sunlu.com/cdn/shop/files/PCABS-BLACK-1KG_bc0363c4-248a-46e5-8d78-6b4ef4debba5.png?v=1773391067&width=1000)
SUNLU FilaDryer E2、最高110℃、プロ仕様の乾燥・アニーリング、エンジニアリング用3Dプリンティングフィラメントのために誕生
- Free shipping to most of USA, EU, UK, CA and AU regions
- Guaranteed Secure Checkout
[SUNLU FilaDryer E2] 2025年最新のポップアップモデル。エンジニアリング材料向けに設計され、1台で無限の創作、乾燥、アニーリングを実現します。
[優れた効率のアニーリング] 最高110°Cまで対応し、市場にあるエンジニアリング材料の99.99%をアニーリングできます。材料の性能を最大限に引き出し、モデルに優れた耐衝撃性や靭性などの特性を与えます。ABS、ABS-CF、ASA、PC、難燃PC、PC-ABS、PC-PBT、CoPA、PA6-GF、PA6-CF、PA12-CF、PA612-CF、PA12などに適しています...
[高速で効率的な乾燥] 500WのPTC超高出力加熱により、創作をさらにスピードアップします。室温から50℃までわずか20分、70℃までわずか30分で加熱できます。温度は最高110℃まで到達します（高温乾燥を行う際は、フィラメントスプールの耐熱性を考慮する必要があります）。
[優れた気密性、超高断熱効果] 穴部分には一体型のシリコンプラグを採用し、カバープレートにはシーリング用シリコンストリップを装備。外部からチャンバー内への水蒸気の侵入を防ぎます。上部・中央部・底部の全方向に二重チャンバー構造を採用し、加熱温度が100°Cを超える環境を実現します。革新的な密閉システムと組み合わせることで、アニーリング工程をより完璧にし、アニーリングと乾燥という2つのニーズを1台で解決します。
[大容量の内部スペース、優れた適応性] 最大対応スプールサイズはΦ250mm*153mmで、市場にあるほとんどの標準スプールに対応します。テストでは、標準的な1KGスプールを2個、標準的な2KGスプールを2個、または標準的な3KGスプールを1個収納できました。（テストにはSUNLUスプールを使用しています。他ブランドのスプールには多少の違いがありますが、基本的に対応しています。使用時はスプールのサイズにご注意ください。）
[高い互換性、99%の使用シーンに対応] エンジニアリング材料と一般的な材料の両方に使用できます。フィラメント設定を内蔵しており、ワンクリックでプリセットを適用できます。フィラメント径は市場にあるほとんどの材料（Φ1.75mm、Φ2.85mm）に対応しています。製品に付属するテフロンチューブのサイズはΦ4*Φ3mmで、長さは8cm*2および1m*2です。
[高い安全性、もう心配不要] インテリジェント保護システムと2段階温度制御スイッチを搭載。温度が上がりすぎると電源が切れ、冷却後に復帰します。二重断熱構造により、内部温度が>100℃の場合でも、外部の接触温度は<60℃に抑えられます。難燃材料グレード。
[エンジニアリング材料の可能性を引き出す] アニーリングにより、エンジニアリング材料の耐衝撃性と耐久性が大幅に向上します。あらゆる作品でエンジニアリンググレードの性能を引き出せるため、ドローン用アクセサリー、ヘルメット、ねじ・ナット、送風パイプなど、高い衝撃耐性と耐久性が求められるモデルに適しています。
Product Name / Model: Filament Dryer E2
Package Dimensions: 454mm×276mm×362mm(LWH)
Product Dimensions: 400mm×220mm×307mm(LWH)
Internal Dimensions: 372mm×192mm×255mm(LWH)
The maximum size: of the spool that can be accommodated(take SUNLU's spools for example) Φ250mm*153mm (1KG×2 or 2KG×2 or 3KG×1)
Net Weight / Gross Weight: 6.1KG / 7KG
Operating Environment: Temperature: 10℃-35℃ RelativeHumidity: ≤95%
Working Temperature Range: 35℃-110℃
Humidity Display Range: 10%-90%(Accuracy±10%)
Note 1:When working temperature≥80℃, humidity sensor will start protection mode (displays<10%humidity)
Note 2:After temperature drops to 70℃, humiditysensor recovers original accuracy after about 20 hours.
Timer Range: 0-99 Hour
Power Input: (Pleaseverify local voltage compatibility) Please select the voltage basedon the silk-screen marking on the sideof the product
Maximum Operating Current: 2.2A @230V 4.2A@120V
Standby Power: ≤1W
Compatible Filament Diameters: Φ1.75mm/Φ2.85mm/Φ3.0mm
What is Annealing & Why is it Necessary
Plastic products are placed in a heated liquid medium or hot air circulation box at a constant temperature for a period of time, and then slowly cooled to room temperature, using heat to accelerate the relaxation of macromolecules in the plastic, thus eliminating or reducing the residual stresses in the products after molding.
Eliminate the local stress concentration phenomenon produced by different cooling speeds during the cooling and curing process of plastic products.
That's what the SUNLU FilaDryer E2 delivers
— a professional-grade 2-in-1 annealing and drying solution specifically designed for Engineering Materials.
How to Anneal?
- Select the Temperature: Determine the right temperature based on the material.
- Control Heating Rate: Ensure the part is evenly heated.
- Maintain Constant Temperature: Adjust the duration based on the size and material.
- Manage Cooling: Allow for gradual cooling or use controlled cooling for the best results
Tips for Successful Annealing!
- Precise temperature control is essential to avoid overheating.
- Test with small models first to reduce trial-and-error costs.
- Allow for shrinkage, and adjust your design accordingly.
-
Fully Sealed Protection
Excellent Airtightness with super insulation effect. One-piece silicone plug over the line hole -
Prevent Secondary Moisture
The cover plate is equipped with sealing silicone strips and magnetic suction block, to isolate the outside water vapor into the chamber. -
Effective Heat and Moisture Insulation
The all-round dual-chamber design at the top, middle and bottom realizes the heating temperature exceeding 100°C. Combined with the innovative closure system, the annealing process is more perfect, solving the two needs of annealing and drying in one machine.
No More Worries about Safety
Intelligent protection system, an alarm beep will sound if the temperature exceeds the preset value by 10°C or the machine continues to work improperly.
Temperature control, over-temperature will be disconnected, cooling will be restored.
Double-layer heat insulation, when the internal temperature is >100℃, the external touch temperature is only <60℃.
All-round protection of the machine and personal safety by fireproof grade materials.
More Durable FilaDryer
The internal details are newly optimized and upgraded to significantly increase the service life of the machine.
New motherboard cooling fan, metal ball, temperature resistance is further improved.
The new cover effectively prevents foreign objects from falling and damaging the air ducts.
FAQs
The basics you need to know about this FilaDryer E2 >
The basics you need to know about this FilaDryer E2 >
1. The maximum heating temperature of SUNLU FilaDryer E2 is up to 110 ℃, please carefully observe the current set parameters (such as filament type, heating temperature) is consistent with the actual need to dry the filament, to avoid too high a temperature leading to deformation of the filament (filament drying temperature, recommended product manuals or this product page of the filament spool data)
For example, if the machine is set to operate at ≥70°C, the temperature resistance of the spool of the filament you are using should be ≥70°C to avoid deformation of the spool.
2. If the product set working temperature ≥ 80 ℃, humidity detection module will be in a protective state (display humidity <10%) is a normal phenomenon, when the drying box temperature is reduced to 70 ℃, about 20H, humidity detection module automatically restore the original precision
How to Anneal?
How to Anneal?
1.Select the Temperature: Determine the right temperature based on the material.
2.Control Heating Rate: Ensure the part is evenly heated.
3.Maintain Constant Temperature: Adjust the duration based on the size and material.
4.Manage Cooling: Allow for gradual cooling or use controlled cooling for the best results.
Tips for Successful Annealing!
· Precise temperature control is essential to avoid overheating.
· Test with small models first to reduce trial-and-error costs.
· Allow for shrinkage, and adjust your design accordingly.
What do we need to know about the operation of the annealing function?
What do we need to know about the operation of the annealing function?
When using the annealing function (MO2 mode), although some filament annealing temperatures and times are provided in the product manual for reference, it is recommended to use the filament manufacturer's recommended temperatures and times for annealing due to the different characteristics of different manufacturers' filaments.
Can I touch the product while it is working?
Can I touch the product while it is working?
Even though the product is protected in many places, the temperature of the outer surface of the product will be ≥55℃ if the set working temperature is ≥80℃.
To avoid burns, do not touch the enclosure/handle the oven while it is in operation (or take appropriate thermal protection measures, e.g., wear insulated gloves).
Is there anything else I can do to make the drying more effective?
Is there anything else I can do to make the drying more effective?
In order to ensure the drying effect, please do not open the upper cover of the drying box during the operation. During the drying process, it is recommended to open the silicone plug of the filament outlet hole (to let the internal moisture fully discharged); after the drying process, it is recommended to plug the silicone plug tightly (to avoid the entry of external moisture).
Safety precautions you need to follow >
Safety precautions you need to follow >
1. Do not place this product within the reach of children. Electrical safety should be observed during operation. Do not use this product near water, such as bathrooms, bathtubs washbasins and other places where water is easily accessible.
2. Please use the original power cord or a power cord that meets the safety certification requirements.
3. When not using this product, please turn off the power to avoid sudden fire.
4. During the working process of this product, please do not put the product on the objects which are sensitive to temperature.
5. Do not touch the heater or fan inside the box during the working process of this product to avoid burns. When drying filaments, the top cover of the drying box should be covered to avoid heat dissipation.
6. Please do not block the internal air inlet and outlet to avoid abnormal heat accumulation.
7. If the product malfunctions, please turn off the power and disconnect the power cord from the power outlet, then contact the after-sales support team (support@sunlu.com).
Order Tracking
Order Tracking
For non-pre-sale orders, the delivery time is generally 1-7 working days, and you can track your order on the website.
Click here for more information(Shipping Policy).
What is the Refund & Return policy?
What is the Refund & Return policy?
Our goal is for every customer to be totally satisfied with their purchase. If this isn’t the case, let us know and we’ll do our best to work with you to make it right.
Store email: sales02@sunlu.com
After-sales email: support@sunlu.com
Why does it show a shipping charge of several hundred dollars at checkout?
Why does it show a shipping charge of several hundred dollars at checkout?
You selected the wrong country/region, please go back to the product page, click the correct country or region where you are, and then select the product to checkout.
We can only ship from the warehouse in the corresponding country/region and cannot ship across country or regions.
Is our filaments(like PLA, PLA+, etc.) a food safe material?
Is our filaments(like PLA, PLA+, etc.) a food safe material?
PLA is a food-safe material, but the filament will be added with toner during the production process, and it may also be contaminated by the printing nozzle during the printing process, so we do not recommend you to use PLA to print tableware
